From 21e31414334b494c4e3f2ebae5f3bfe6c5e00da3 Mon Sep 17 00:00:00 2001 From: Javier Date: Mon, 26 Oct 2026 00:53:49 +0100 Subject: fix links --- README.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/README.md b/README.md index 5c659ec..29c3e28 100644 --- a/README.md +++ b/README.md @@ -114,7 +114,7 @@ decide which drive letters you prefer for the partitions on your pendrive. For that, go to Device Manager, Disk Drives, and select the CH375 USB Disk as follows: -![Assigning Disk Drive Leters](https://depot.javispedro.com/dos/chu/config.png) +![Assigning Disk Drive Leters](https://depot.javispedro.com/dos/chu/img/config1.png) Partitions will be assigned to disk letters in order. @@ -127,7 +127,7 @@ You have to follow the usual procedure for non-PnP hardware in Win 9x. 2. Say you do not want to do automatic detection, and select "Hard Disk Controller" from the type of devices. -![Add New Hardware Wizard](https://depot.javispedro.com/dos/chu/install1.png) +![Add New Hardware Wizard](https://depot.javispedro.com/dos/chu/img/install1.png) 3. Use "Have Disk..." and point to the directory containing `chudisk.pdr` and `chudisk.inf`. @@ -141,7 +141,7 @@ settings. Do not reboot yet. In the Resources tab, you can configure the IO address to match whatever your hardware is using. On the Pocket386/Book386, this is 0x260-0x261. -![Resources tab](https://depot.javispedro.com/dos/chu/install2.png) +![Resources tab](https://depot.javispedro.com/dos/chu/img/install2.png) 7. Windows will tell you that now you can shutdown the computer to install your hardware. It's already installed, so reboot. @@ -152,7 +152,7 @@ Uses OpenWatcom, same as DOS one. With `debug=1` , by default the debug log goes into the IOS debug log, which will only be shown in the debug versions of IOS. -# Linux 2.0-2.2 +# Linux 2.0 - 2.2 No binaries are currently provided for Linux, since I find it easier to just build for your distribution. You can even do that on-device. -- cgit v1.2.3