aboutsummaryrefslogtreecommitdiff
path: root/README.md
diff options
context:
space:
mode:
authorJavier <dev.git@javispedro.com>2022-02-27 17:40:45 +0100
committerJavier <dev.git@javispedro.com>2022-02-27 18:28:02 +0100
commitdee9ca901fd3f2edec7af8f82300257b285067b0 (patch)
tree04907d71f81b80de8e8ccff4373fba13fa3a93b4 /README.md
downloadvbados-dee9ca901fd3f2edec7af8f82300257b285067b0.tar.gz
vbados-dee9ca901fd3f2edec7af8f82300257b285067b0.zip
initial import
Diffstat (limited to 'README.md')
-rw-r--r--README.md56
1 files changed, 56 insertions, 0 deletions
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..d26c58f
--- /dev/null
+++ b/README.md
@@ -0,0 +1,56 @@
+This is a mouse driver for Windows 3.x with VirtualBox mouse integration support.
+
+I have tested it with Windows 3.0 in real and 386 enhanced modes, as well as Windows 3.11 in 386 enhanced mode.
+
+# Install
+
+Just copy vbmouse.drv to your WINDOWS\SYSTEM directory and edit WINDOWS\SYSTEM.INI 's mouse.drv line to point to it, e.g.
+
+ [boot]
+ mouse.drv = vbmouse.drv
+
+For a "proper" installation, you may create a floppy image containing oemsetup.inf and vbmouse.drv
+and point the Windows Setup program to it when it asks for a 3rd party mouse driver disk.
+
+# Building
+
+This requires [http://open-watcom.github.io/](OpenWatcom 2.0), albeit it may work with an older version,
+and was only tested on a Linux host.
+
+The included makefile is a wmake makefile. To build it just enter the OpenWatcom environment and run `wmake vbmouse.drv`.
+`wmake flp` may be used to build a floppy image containg oemsetup.inf and vbmouse.drv for easier installation.
+
+# Design
+
+This is at its core a driver for a plain PS/2 mouse driver, using the PS/2 BIOS.
+If running outside VirtualBox, in fact it will behave like a PS/2 mouse driver.
+However, it removes a lot of checks for older platforms and is mostly written in C rather than assembly,
+so hopefully it is easier to understand than the Windows sample drivers.
+
+The VirtualBox guest integrations present itself as a PCI device to the guest.
+Thanks to the BIOS, the device is already pre-configured.
+The driver uses the real-mode PCI BIOS to request the current configuration of this PCI device.
+To communicate with the host, the guest must send the PCI device the (physical) address
+of a buffer containing commands to be sent to the host.
+The host will write back the response in the same buffer.
+Further details are available in [https://wiki.osdev.org/VirtualBox_Guest_Additions](OSDev).
+The only challenge here is getting the physical address from inside 386 protected mode Windows,
+but turns out this can be done with the `GetSelectorBase()` WINAPI.
+
+When VirtualBox is told that the guest wants absolute mouse information, VirtualBox will stop sending
+relative mouse information via the PS/2 mouse. However, the PS/2 controller will still send interrupts
+whenever mouse motion happens, and it will still report mouse button presses. In fact, the only way
+to obtain mouse button presses is still through the PS/2 controller.
+Thus, the only difference between this driver and a standard PS/2 mouse driver is that,
+when an interrupt from the mouse comes in, we won't report the relative mouse motion to Windows.
+Rather, we call into VirtualBox (right from the PS/2 BIOS interrupt handler)
+to obtain the absolution mouse position, and report that to Windows.
+
+### Known issues
+
+Unfortunately, when a MS-DOS old application is foregrounded full-screen, this mouse driver will remain active,
+and therefore VirtualBox will not send relative motion data via the PS/2 protocol.
+This means full-screen MS-DOS programs will see a PS/2 mouse and will receive button presses from it, but will not
+receive mouse motion. The driver would need to deactivative itself in response to a full-screen MS-DOS VM, perhaps
+by hooking interrupt 2Fh function 4002h (Notify Foreground Switch) or the like.
+