1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
|
This document describes an extension to the CuteMouse wheelapi.txt
to support two wheels (vertical and horizontal).
NOTE: Draft, subject to change.
---------------------------------------------------------------------
Changes to the wheelapi v1 functions:
INT 33/0011 - Check wheel support and get capabilities flags
AX = 0011h
Return: AX = 574Dh ('WM' in assembly) if Wheel API is supported by driver
CX = Capabilities flag
Bit(s) Description
------ -----------
0 1=Pointing device supports wheel
1 1=Pointing device supports 2nd wheel
2-15 Reserved
Notes: this function should be examined before accessing wheel features.
vbmouse currently assumes this is called after each int33/0, otherwise
wheel events may be sent as keystrokes instead of wheelapi.
INT 33/0003 - Get cursor position, buttons status and wheel counter
AX = 0003h
Return: BL = buttons status (bits 0-4)
CX = column
DX = row
BH = 8-bit signed counter of wheel movement since last call
positive value means downward wheel movement.
SI = 16-bit signed counter of 2nd wheel movement since last call
positive value means rightward wheel movement.
Note: calling this clears the wheel counter for ALL wheels.
INT 33/0005 - Get button press or wheel movement data
AX = 0005h
BX = button number, -1 for vertical wheel, -2 for 2nd/horizontal wheel
Note: as in wheelapi v1, AH always contains (1st) wheel movement on return
independently of button number requested in BX.
INT 33/0006 - Get button release or wheel movement data
AX = 0006h
BX = button number, -1 for vertical wheel, -2 for 2nd/horizontal wheel
INT 33/000C - Define User Interrupt Routine
INT 33/0014 - Exchange User Interrupt Routines
Bitfields for mouse call mask:
Bit(s) Description
0-6 same as Table 03171 (as in int33.lst)
7 vertical wheel movement (as in wheelapi.txt)
8 (absolute mouse event bit)
9 horizontal wheel movement
10 4th button pressed
11 4th button released
12 5th button pressed
13 5th button released
14-15 unused
Notes: on entry, bit 9 of CX (call mask) indicates that the user routine
will be called on horizontal wheel movement
if the user routine is called with bit 9 of AX (condition mask) set,
then BH will hold the 8-bit signed counter of HORIZONTAL wheel
movement since the last call to the routine. if bit 7 is set, then
BH holds VERTICAL wheel movement.
it is impossible for the user routine to be called with both
vertical (bit 7) and horizontal (bit 9) movement.
A program that just sets 0xFFFF event mask and expects to find vertical
wheel movement info in BH (wheelapi v1 style) will be confused, as
here when bit 9 is set BH will contain horizontal wheel movement
instead. DN/2 does this, so horizontal scrolling acts like vertical.
|
